One Size Fits Most

Respironics Total Face CPAP Mask Features

• Built- Exhalation Ports
• The faceplate does not obstruct the user's vision.
• Entrainment Valve allows patient to breathe room air if pressure is discontinued as in the case of power failure.
• Quick Release Cord enables fast removal of the mask.
• Headgear Straps attach to VelcroŽ hooks for secure placement.

Helpful Hints for Respironics CPAP Masks

• Headgear should be secure but not too tight. Tighten top strap first, then bottom strap.
• Final adjustment should be done while lying down with the air blowing at the prescribed pressure through the tubing and mask.
• Cushion should not be crushed against the face.
• Tight fit is not necessary for effective therapy. By tightening, folds are created in the material, causing a leak path. Try loosening the mask if leaks are present.
• Mark the headgear straps with permanent marker to remember where they should be fastened.
• Remove the mask by pulling over head or use the quick release clip. Do not block the exhalation port. It is necessary to clear carbon dioxide.
• Loop the tubing over the headboard to reduce pull on mask.
• Place the tubing under a blanket to warm the air.

Price includes the following patient support: telephone support with respect to therapy questions and problems, device re-titration, replacement accessories and supplies available for purchase, after-sales service and support. Full Support MSRP: $274,Limited Support MSRP: $224

"Manufacturer's Note: Respironics recommends that new patients purchase their devices, masks and initial accessories from a homecare company that can provide and individualized patient equipment set-up, clinical and after-sales support, and a program to assist patients with therapy success." A valid prescription is required for the purchase of this product. We are only authorized to sell and ship Respironics products to end-users residing in the United States.