Respironics Simplicity Nasal CPAP Mask

Respironics Simplicity CPAP Mask

• Exhalation Port: Results in quiet air flow, and its innovative built-in design eliminates the need for additional valves or ports.
• 360 Swivels at the top and bottom of the tubing allow the tubing to twist more freely as the patient moves.
• Mask Cushion: Made of soft, pliable silicone that gently contours around the tip of the patient's nose to provide a snug seal.
• Flexible, lightweight tubing permanently attached to the mask and connects easily to standard circuit tubing.
• Stability Clip may be attached to sleepwear or to headgear for added support. A Velcro tab secures placement of the Stability Clip on the tubing.
• Used with permission of Respironics, Inc., Murrysville, PA

Helpful Hints for Respironics CPAP Masks

• Headgear should be secure but not too tight. Tighten top strap first, then bottom strap.
• Final adjustment should be done while lying down with the air blowing at the prescribed pressure through the tubing and mask.
• Cushion should not be crushed against the face.
• Tight fit is not necessary for effective therapy. By tightening, folds are created in the material, causing a leak path. Try loosening the mask if leaks are present.
• Mark the headgear straps with permanent marker to remember where they should be fastened.
• Remove the mask by pulling over head or use the quick release clip. Do not block the exhalation port. It is necessary to clear carbon dioxide.
• Loop the tubing over the headboard to reduce pull on mask.
• Place the tubing under a blanket to warm the air.

Small Mask with Headgear 1002757 Medium Mask with Headgear 1002759

"Manufacturer's Note: Respironics recommends that new patients purchase their devices, masks and initial accessories from a homecare company that can provide and individualized patient equipment set-up, clinical and after-sales support, and a program to assist patients with therapy success." A valid prescription is required for the purchase of this product. We are only authorized to sell and ship Respironics products to end-users residing in the United States.