Respironics Profile Lite CPAP Mask
- With its softer, lighter cushion, Respironics Profile Lite Nasal Gel Mask is extremely comfortable right out of the box. The unique gel cushion and forehead pad gently rest against the patient's face for a soft, pillowy fit.
- Not only is the Profile Lite a comfortable off-the-shelf mask, it's also a fully customizable mask.
- The Profile Lite consists of four parts and just two that need to be cleaned, making it easier to use and care for than other masks.
- The simple, 10-minute customization process molds the mask to the individual's facial contours for a personalized seal. Your patients can easily customize the mask on their own, repeating the process as needed, to find the perfect fit.
- The Profile Lite requires less tightening to ensure a seal, thus improving patient comfort.
- Deluxe headgear included.
- Used with permission of Respironics, Inc., Murrysville, PA
Profile Lite Mask Parts Respironics Profile Lite Part Numbers:
Petite with Headgear 1004086
Small with Headgear 1004087
Medium/Small with Headgear 1004088
Medium with Headgear 1004089
Medium/Wide with Headgear 1004110
Large with Headgear 1004111
Large/Narrow with Headgear 1004112
Helpful Hints for Respironics Profile Lite CPAP Masks
- Headgear should be secure but not too tight. Tighten top strap first, then bottom strap.
- Final adjustment should be done while lying down with the air blowing at the prescribed pressure through the tubing and mask.
- Cushion should not be crushed against the face.
- Tight fit is not necessary for effective therapy. By tightening, folds are created in the material, causing a leak path. Try loosening the mask if leaks are present.
- Mark the headgear straps with permanent marker to remember where they should be fastened.
- Remove the mask by pulling over head or use the quick release clip.
Do not block the exhalation port. It is necessary to clear carbon dioxide.
- Loop the tubing over the headboard to reduce pull on mask.
- Place the tubing under a blanket to warm the air.
Price includes the following patient support: telephone support with respect to therapy questions and problems, device re-titration, replacement accessories and supplies available for purchase, after-sales service and support.
Full Support MSRP: $195,Limited Support MSRP: $145
"Manufacturer's Note: Respironics recommends that new patients purchase their devices, masks and initial accessories from a homecare company that can provide and individualized patient equipment set-up, clinical and after-sales support, and a program to assist patients with therapy success." A valid prescription is required for the purchase of this product. We are only authorized to sell and ship Respironics products to end-users residing in the United States. 
