We offer this product at a price we can't display. To receive an instant price quote, please enter your e-mail address and click "Email Instant Price Quote"
Respironics ComfortFusion CPAP Nasal Mask Features
- The ComfortFusion is a comfortable, lightweight and easy-to-use nasal interface that delivers Positive Airway Pressure (PAP) for the treatment of Obstructive Sleep Apnea (OSA).
- The ComfortFusion has a soft nasal cushion that gently seals around the nose of the patient.
- The cushion seal is supported by a faceplate and an adjustable forehead arm.
- By using the adjustable forehead arm “StabilitySelector®” to support and adjust for the optimum cushion angle, the ComfortFusion is able to provide a very comfortable and stable seal, while requiring low strapping pressure on the headgear and low cushion pressure on the nose.
ComfortFusion Part Numbers:
Small ComfortFusion with Headgear- 1040769
Medium ComfortFusion with Headgear- 1040770
Included with Mask
* Headgear
* Pictorial quick fitting guide
* Instruction manual
* A registration card
* A replacement reminder card and a reminder sticker that can help track and manage your mask replacement cycle.
Comfort Fusion Mask Parts Respironics ComfortFusion Fitting Guide (PDF)Respironics ComfortFusion Cleaning Guide (PDF)Respironics Helpful Hints for ComforFusion CPAP Masks
- Headgear should be secure but not too tight. Tighten top strap first, then bottom strap.
- Final adjustment should be done while lying down with the air blowing at the prescribed pressure through the tubing and mask.
- Cushion should not be crushed against the face.
- Tight fit is not necessary for effective therapy. By tightening, folds are created in the material, causing a leak path. Try loosening the mask if leaks are present.
- Mark the headgear straps with permanent marker to remember where they should be fastened.
- Remove the mask by pulling over head or use the quick release clip.
Do not block the exhalation port. It is necessary to clear carbon dioxide.
- Loop the tubing over the headboard to reduce pull on mask.
- Place the tubing under a blanket to warm the air.
Used with permission of Respironics, Inc., Murrysville, PA
Full Support MSRP: $174,Limited Support MSRP: $124
Price includes the following patient support: telephone support with respect to therapy questions and problems, device re-titration, replacement accessories and supplies available for purchase, after-sales service and support.
"Manufacturer's Note: Respironics recommends that new patients purchase their devices, masks and initial accessories from a homecare company that can provide and individualized patient equipment set-up, clinical and after-sales support, and a program to assist patients with therapy success." A valid prescription is required for the purchase of this product. We are only authorized to sell and ship Respironics products to end-users residing in the United States. 
